EnGenius Technologies ESR-9710 User Manual download pdf (Page 23)

ESR-9710 Wireless N Gigabit Router Version 1.0

 The wireless wizard will inform you that there are two major steps in the process.

o Select the configuration method for your wireless network

o Connect your wireless device

 Click on the Next button to continue.

 You may select from three available options:

o PIN: Select this radio button if your wireless device supports PIN

o Push Button: Select this radio button if your wireless device supports push

button.

o Manual: Select the radio button if you would like to setup your wireless

device manually. Refer to chapter 5 in order to manually configure the device.

 The wizard will either display the wireless network settings to guide you through

manual configuration, prompt you to enter the PIN for the device, or ask you to press

the configuration button on the device. If the device supports Wi-Fi Protected Setup

and has a configuration button, you can add it to the network by pressing the

configuration button on the device and then the on the router within 60 seconds. The

status LED on the router will flash three times if the device has been successfully

added to the network.

 There are several ways to add a wireless device to your network. Access to the

wireless network is controlled by a registrar. A registrar only allows devices onto the

wireless network if you have entered the PIN, or pressed a special Wi-Fi Protected

Setup button on the device. The router acts as a registrar for the network, although

other devices may act as a registrar as well.

4.2.1 Using the PIN

 A PIN is a unique number that can be used to add the router to an existing network

or to create a new network. The default PIN may be printed on the bottom of the

router. For extra security, a new PIN can be generated. You can restore the default

PIN at any time. Only the Administrator ("admin" account) can change or reset the

PIN.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 94 95

No comments

EnGenius Technologies ESR-9710 User Manual Page 23