EnGenius Technologies ESR-9710 User Manual download pdf (Page 54)

ESR-9710 Wireless N Gigabit Router Version 1.0

6.3.6 Routing

 This section adds a new entry into the routing table.

 Enable: Place a check in this box to enable the routing table entry.

 Name: Specify a name for the rule.

 Destination IP: Specify the destination IP address.

 Netmask: Specify the subnet mask for the IP address.

 Gateway: Specify the IP address of the gateway.

 Metric: Specify the number of routing hops. The route metric is a value from 1 to 16

that indicates the cost of using this route. A value of 1 is the lowest cost, and 15 is

the highest cost. A value of 16 indicates that the route is not reachable from this

router. When trying to reach a particular destination, computers on your network will

select the best route, ignoring unreachable routes.

 Interface: Select the interface from the drop-down list.

 Click on the Save button to insert the entry into the Routing table.

6.3.7 Access Control

 The Access Control section allows you to control access in and out of devices on

your network. Use this feature as Parental Controls to only grant access to approved

sites, limit web access based on time or dates, and/or block access from applications

such as peer-to-peer utilities or games.

 When Access Control is disabled, every device on the LAN has unrestricted access

to the Internet. However, if you enable Access Control, Internet access is restricted

for those devices that have an Access Control Policy configured for them. All other

devices have unrestricted access to the Internet.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 94 95

No comments

EnGenius Technologies ESR-9710 User Manual Page 54