EnGenius Technologies ESR-9710 User Manual download pdf (Page 47)

ESR-9710 Wireless N Gigabit Router Version 1.0

 BingPond Server: Specify the server name or IP address as specified by your ISP.

 User Name: Specify the user name which is provided by your ISP.

 Password: Specify the password which is provided by your ISP, and then verify it

once again in the next field.

 Primary / Secondary DNS Address: Specify the primary and secondary IP address,

which is assigned by your ISP.

 MTU: The Maximum Transmission Unit (MTU) is a parameter that determines the

largest packet size (in bytes) that the router will send to the WAN. If LAN devices

send larger packets, the router will break them into smaller packets. Ideally, you

should set this to match the MTU of the connection to your ISP. Typical values are

1500 bytes for an Ethernet connection and 1492 bytes for a PPPoE connection. If the

router's MTU is set too high, packets will be fragmented downstream. If the router's

MTU is set too low, the router will fragment packets unnecessarily and in extreme

cases may be unable to establish some connections. In either case, network

performance can suffer.

 MAC Address: If you need to change the MAC address of the rounter's WAN-side

Ethernet interface, either type in an alternate MAC address (for example, the MAC

address of the router initially connected to the ISP) or click on Clone Your PCs MAC

Address.

 Click on the Save Settings button to store these settings.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 94 95

No comments

EnGenius Technologies ESR-9710 User Manual Page 47